Controls 10 steps of on-off ventilation.
0-10v ventilation capable
In addition to the ambient temperature, ventilation can be conditioned by humidity, CO2 (carbon dioxide), NH3 (ammonia) and external temperature using optional sensors
Manages the climate control of windows in up to 4 independent zones, Ventilation (0 ... 100% speed adjustment), Heating and Cooling.
In addition to room temperature, natural ventilation can be affected by humidity, CO2 (carbon dioxide), NH3 (ammonia) and external temperature.
The successor to the HP29
XP29 works as complete alarm for a forced ventilation system, it is recommended as an independent alarm to complement your computer climate controller. Works well alongside, Q, X and XP products.
Separate from the installed ventilation alarm and keeps constant monitoring of:
XP50 hopper weight controller for the rationed distribution of feed in breeding and rearing farms.
XP50 manages the feed control on its own line of feeders by controlling the weight of the line hopper.
The principle of operation is as follows:
● At the Filling time, the Kg of feed from the ration is loaded into the hopper.
● At the Descent time, the feeders are brought down.
● At the Feeders time, feeders are started (which can also work in timing with On and Off times).
● At the Water time, water is distributed (a water-meter can be connected, to record water consumption).
● Up to 8 meals per day can be programmed.
In case of several distribution lines, XP50 can work both as a Master (on the first line) and as a Slave (on the other lines), so that the start times (hopper filling, feeders descent, feeders start, water) are set only on the Master (ensuring the synchronization of the various start), while the feed quantity to be distributed is rationed for each individual distribution line.
Records the weight of the birds by a multi-weighing system. For each weighed bird the program automatically tares before weighing the next bird.
By using the multi-tare system bird weighing is complete even if the bird does not get off of the scale.
Climatec can provide an appropriate weigh plate to complement the XP51 for the bird type being grown.
CONTACT USXP51 brochure
XP61 carries out weight control by connecting to load cells on the silo.
At the set meal times, the quantity of feed to be distributed is dosed.
Loading of the silo is recognized automatically, interrupting the distribution, and recording all the data of the silo load (date and quantity of feed loaded), and resuming the distribution at the completed silo load.
By monitoring the feed and distributed water it is possible to predetermine parameters beyond which the minimum or maximum distribution alarm occurs. XP61 integrates the daily timer of control of the water hours, lights, and of 1 free timer: through the connection to an appropriate water meter, it is possible to record the water consumption.
XP61 carries out weight control by connecting to load cells on 2 silo’s.
At the set meal times, the quantity of feed to be distributed is dosed.
Loading of the silo’s is recognized automatically, interrupting the distribution, and recording all the data of the silo load (date and quantity of feed loaded), and resuming the distribution at the completed silo load.
XP63 manages water alarming for drinkers’ lines up to a maximum of 96 lines. This control enables you to diagnose the lack of water in any one of the drinker lines.
Water sensors are added by 2 stainless steel self-tapping screws to be fitted to the terminal exhaust pipe of each drinker line. Besides performing the water alarm for each line of drinkers you can record the overall water consumption by connecting up to 2 water meters so you can determine the minimum and maximum daily consumption, alert in case of alarm and record the daily water consumption of the whole cycle.
CONTACT USXP63 brochure
XP65 – Ventilation Controller, Controls 5 steps of on-off ventilation.
XP65 can also be connected to a relative humidity probe to operate the cooling system, CO2 probe and to the depressiometer to operate air inlet vents to a pressure or positional setting.
Air inlets can be set to work according to indoor temperature (Proportional or Floating Mode), on pressure or according to ventilation step in associative mode.
XP66 controls 5 steps of on-off ventilation with one 0-10V output to control fans by variable speed.
The temperature probe controls the parameters of Ventilation, Air Inlet Vents, Heating system, Cooling system and Alarm.
XP66 can also be connected to the %RH probe (to operate the Cooling system) and to the Depressiometer (to operate faps).
Flaps can also be set to work according to indoor temperature (Proportional or Floating Mode) or in a pre-set % opening according to ventilation step (Associative Mode).
XP68 is a data logger for recording the following parameters and displays them on screen in graph format:
Ambient temperature
Ambient humidity
Ambient CO2
Ambient NH3
External temperature
You can view all of these parameters in the archives of XP68 via graphs
Alarm function for all conditions measured
CONTACT USXP68 brochure
Controls ascending and descending ramps and the standby timing at minimum value and is compatible with all dimmable lights 0-10v. XP69 can work by percentage 0 to 100% or by programming the required lux with the optional LXD probe.
When the lux sensor is installed you can also switch lights off via the cut-off function when the ambient luminosity is higher than the set one. The work curve can be calendarized on a day-by-day basis so the right light can be given to animals according to the day of cycle.
